Connecting Lines; Installing Batteries - Geemarc AMPLIDECT 280 Manual

Delete all the messages
Way 1: Using the menu
1. Press the TAM soft key in Standby mode.
2. Press the Down key to choose Message, use
the Select key to confirm.
3. Press the key repeatedly to choose
Delete All, press the Select key to confirm.
4. The LCD will show Confirm ?. Press the OK
key to delete all the messages or press the
Cancel key to exit.
Way 2: Using the base unit
In the active mode (all lights on) press and hold
the key to delete all the messages. The
relevant voice prompting will be heard, too. If you
press and hold this key during the playing, the
current message will be deleted.
Note:
Up to 15 minutes messages can be recorded.
50
Record the memo
You can use your phone to record
messages (each can be up to 3 minutes) for
another user of your phone. The memo can be
played back as a message.
1. Press the TAM soft key in Standby mode.
2. Press the Down key to choose Message, use
the Select key to confirm.
3. Press the key repeatedly to choose Memo
Record, press the Select key to confirm.
4. You can record your message after a tone.
Recording will stop automatically after
minutes. You can also confirm and end the
recording by pressing the OK key. During
recording the LCD shows "Recording...".
Note:
If someone leaves you a memo, the
will appear in the standby mode on the LCD.

Connecting Lines

memo
1. Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a
standard phone wall outlet.
2. Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC adapter
into a standard AC wall outlet.

Installing Batteries

3
The rechargeable Ni-MH batteries (AAA size) come with
your phone. Install the battery before using your
phone.
1. Slide the battery cover in the direction of the
arrow and pull it off.
icon
2. Insert new batteries as indicated, matching
correct polarity (+,-).
To AC wall outlet
To phone wall outlet
11