Answer A Call; Volume Boost Function; End A Call; Adjust Earpiece And Speakerphone Volume - Geemarc CL595 User Manual

4.3

Answer a Call

When there is an incoming ring, pick up the corded handset or press SPEAKER
4.4

Volume Boost Function

The Volume Boost function allows you to amplify the handset earpiece volume to compensate for the ear's
limited sensitivity.
During a call, you can activate the Volume Boost function with the volume of earpiece increased by
several dBs by pressing
press again.
4.5

End a Call

During a call, put the corded handset on the base station to end the call.
OR
Press SPEAKER
4.6

Adjust Earpiece and Speakerphone Volume

There are 6 levels (VOLUME 1 to VOLUME 6) to choose from for each of earpiece and 7 levels for
speakerphone volume of the base.
Using the base: During a call:
Press / to select volume 1-6. The current setting is shown. When you end the call, the settings will
remain at the last selected level.
4.7

Mute a Call

With the call muted, you can talk to someone nearby without letting the caller hear you during a call.
Using the base: During a call:
to mute the microphone and "MUTE ON" is displayed on the LCD. Your caller
Press
cannot hear you. Press
4.8

Modify the tonality during a call

Using the base: During a call:
Press M4 TONE to increase the high, low frequencies or come back in normal response.
4.9

Emergency Call without Main Power

The corded base unit can make an emergency call with the corded handset when the mains AC power is
disconnected.
Pick up the corded handset and wait for several seconds to get the dial tone and then enter the phone number
to make a call.
REMARK:
It is not possible to dial numbers from memories when the mains power is off.
When the mains power is off, you can also answer an incoming call with the corded handset.
When the phone rings, pick up the corded handset to talk to the caller.
, "BOOSTER ON" displays on the base screen. To cancel it,
if you have a call in speakerphone mode.
again to resume the microphone.
13
to answer the call.