Using The Phone; Answer A Call; Making A Call; Storing Telephone Numbers - Geemarc ClearSound CL64 Manual

If you are using this telephone with a hearing aid, set your

1 -Answer a call

- When an incoming call is received the phone will ring and the
ringer LED will flash, to answer the call lift the handset and
speak.
- On completion of the call, carefully replace the handset in the
cradle to release the line. See also section on Auto/Manual
switch

2 - Making a call

- Lift the handset.
- Await the dial tone and press the SOS, M1 or M2 buttons
once
- On completion of the call, carefully replace the handset in the
cradle.
See also section on Auto Dial On/Off switch

3 - Storing telephone numbers

Your telephone has a SOS memory button with 112 stored as
default and also two other memory buttons, M1 & M2
This SOS number can be changed to a number of your choice
which can be up to 18 digits. To change the SOS memory:

USING THE PHONE

hearing aid to the T setting.
9