Unpacking - Geemarc AMPLIDECT 280 Manual

Troubleshooting
Symptom
Check & Remedy
Check that the power adapter is properly connected.
No operation
Check that the telephone line cord is properly connected.
Check that the handset batteries in full power.
Check that the handset batteries are installed properly.
Check that the telephone line cord is properly connected.
No dial tone
Check that the power adapter is properly connected.
Check that the handset batteries are installed properly.
Nothing appears
Check that the handset batteries have full power.
on the display
Check that the handset is on.
Handset seems Check the charge contacts.
to have very short
Consistently short battery life may indicate that replacement of the batteries is necessary.
battery life
Make sure the right batteries are used
Make sure you have subscribed to a Caller ID service via your network provider.
Caller's number
The caller may have withheld their details.
is not displayed
Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.
58

Unpacking

Once you have unpacked your phone, make sure that all the parts shown below are available. If any
pieces are missing or broken, please promptly call your dealer.
Base
3 AAA Ni-MH
Adapter*
batteries
* The shape of the plugs can vary according to each country's specification.
Handset User's manual
Carrying clip Line cord*
3