Ringer Setting - Geemarc AMPLIDECT 280 Manual

Registration
The supplied handset is already registered with
the number 1. You can register up to 5 handsets
to your base unit in order to share the same line
with other people.
Before registering a handset to the base, you
should press and hold base unit key for
about 5 seconds then release it.
1. Press the Menu soft key.
2. Press the key repeatedly to choose
the Registration menu, press the Select
soft key.
3. Use the key to scroll through the Base
names list, press the soft key to choose a
base. The handset will search for
requested base and the relevant information
will flash on the LCD.
42
4. If the base is found, and the handset is
successfully registered, you will be prompted
to enter the PIN code (the default one is
0000). On validation of the PIN code, the
Registration tone will sound and the Base
assigns a number to the handset. If the PIN
code entered is invalid, a warning tone will
sound, and the handset will return to the
previous registration state.
5. If the base is not found, the handset will
behave according to the Out
condition.
the

Ringer Setting

You can select your own external (from the
telephone Network) or internal (from other
handsets registered to the same base) ring
tone and adjust the volume.
1.Press the Menu soft key.
2.Press the key repeatedly to choose HS
Settings menu, then press the Select soft
key.
3.Press the key to choose Ring Setup,
of Range
press the Select soft key.
4.Press the Select soft key to choose INT
Ring or press the Down key to choose EXT
Ring, press the Select soft key.
5.Press the key to choose Melody or
Volume, press the Select soft key.
Result: You can select the ring tone from
Melody 1 to 10 or adjust the volume
from Volume 1 to 5. You can also turn
the ringer Off. Each time you press
the key, the handset sounds the
selected melody or loudness.
6.Press the Save soft key to confirm.
Note:
If you set to turn the ringer OFF, when a
c a l l c o m e s i n , o n l y t h e N e w
information appears on the LCD.
C a l l
19