Protection - PP3DP UP! mini User Manual

Gloves: When performing a certain maintenance work, machine
may be hot and protective gloves are required to avoid being burnt.
Safety Glasses: Wear safety glasses to avoid injury to the eyes.

1.2.2 Protection

 UP! printer must not be exposed to water or rain, otherwise may cause
damage.
 Do not shut down UP! Printer or pull the USB cable during the process of
loading a digital model to Printer, otherwise the model data may not be
transmitted successfully.
 When using the "Extrude" function, keep at least 50mm gap between the
nozzle and the print platform. If the gap is too small, nozzle may not
extrude filament easily, which could cause nozzle clog.
 UP! printer is designed to function properly at temperature between 15° C
and 30° C and humidity between 20% and 50%; Operating outside these
limits may cause low print quality.
UP! mini 3D Printer User Manual
1. Introduction
4