Table of Contents
Advertisement
8. Troubleshooting
Figure 8-3 Uninstall Old Driver
4. Install the latest UP! Software.
5. Unplug the USB cable, then plug it in again. Windows will find a new device.
Manually select driver folder (Default is C:\Program files\UP\Driver or
C:\Program files(X86)\UP\Driver if Windows is a 64bit system.);
6. A new driver section in the device manager will show up like below:
Figure 8-4 New Device Driver Installed
UP! mini 3D Printer User Manual
55
Advertisement
Table of Contents
Need help?
Do you have a question about the UP! mini and is the answer not in the manual?