Protection - PP3DP UP! mini User Manual

WARNING: Indicates a potentially hazardous situation which, if not
avoided, may result in serious injury.
Gloves: When performing certain maintenance procedures, the
machine may be hot and gloves are required to avoid burns.
Safety Glasses: Wear safety glasses to avoid injury to your eyes.

1.2.2 Protection

 The printer must not be exposed to water or rain, or damage may occur.
 Do not shut down the UP! System or pull out the USB cable when loading
a digital model, or the model data may be lost.
 When using the ―Extrude‖ function, keep at least 50mm between the
nozzle and the platform. If too close, the nozzle may get blocked.
 The printer is designed to work properly at an ambient temperature of
between 15° C and 30° C and humidity of between 20% and 50%;
Operating outside these limits may result in low quality models.
UP! mini 3D Printer User Manual
1. Introduction
4