Appendix B - Remote Control Operation; Rs-232 Remote Control Interface; Button Commands; Immediate Commands - ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual

RS-232 Remote Control Interface

The multiplexer has a built-in RS-232 serial interface which supports remote control operation
through simple ASCII commands. The commands provide access to the front panel button
operations just like the IR remote control.
The multiplexer serial interface is fixed at 9600 baud, 8-bit, 1 stop bit, and no parity. The
command format is:
command - return
The command is 2 characters or 2 characters plus parameter, and must be followed by a
"carriage return".
The multiplexer will respond with:
> if the command was recognized, or
? if the command was not recognized or is invalid

Button Commands

BD
BP
BS
BF
BQ
BZ
BV
BO
BM
BL
BC n

Immediate Commands

DM m, c, c, ---, q
TIME hh:mm:ss
DATE dd/mm/yy
Ec n
EXIT
ENTER
40
APPENDIX B -
REMOTE CONTROL OPERATION
DISPLAY button
PIP button
SEQUENCE button
FREEZE button
ROTATE button
ZOOM button
PLAYBACK button
MACRO button
MONITOR button
ALARM button
N = 1 ~ 16 Camera number
Set display mode
m = display mode, c = camera mode, q = quadrant
m : 0 = full, 1 = 2x2, 2 = 3x3, 3 = 4x4, 4 = PIP,
5 = Dual PIP, 6 = Split, 7 = Squish, 8 = Center Insert
9 = Split Quad,
q : 0 = lower right, 1 = lower left
Set time
Set date
Echo characters. n : 0 = echo off, 1= echo on
Main exit menu
Enter menu
BR REC button
B2 2nd button
BA ACCEPT button
BC CANCEL button
MU Move UP
ML Move LEFT
MR Move RIGHT
MD Move DOWN
UNIT n N = 1 ~ 255 unit number
PREV Preview