Table of Contents
Advertisement
2ND
The 2ND button is used to reset alarms and select user defined modes.
CAMERA 1 – 16 Buttons
The Camera buttons are used to select cameras for viewing or as numbers in programming
configurations.
Back Panel Connections
The connections on the back of the multiplexer are explained below. The only difference
between the 4, 9, and 16-channel unit back panel connections are the number of camera inputs
and outputs.
IN
IN
IN
CAM 1
CAM 2
CAM 3
CAM 4
CAM 5
OUT
OUT
OUT
CAM IN (1-4, 1-9, or 1-16)
The CAM IN connectors are used to connect the multiplexer to the video output of a BNC
camera.
CAM OUT (1-4, 1-9, or 1-16)
The CAM OUT connectors provide loop-through video options for the cameras connected to
CAM IN.
AUX (1, 2, 3, 4)
The AUX connections are Spot Monitor outputs. The Setup Menu allows the user to select
which cameras to output on each of the four AUX connections for viewing on accessory
monitors. (1 AUX on the 4-ch unit; 4 AUX on the 9-ch and 16-ch units)
MAIN (BNC and S-VIDEO)
The multiplexer offers two options for viewing the main video output from the unit, either
through a BNC connection or an S-Video connection.
VCR (IN and OUT) (BNC and S-VIDEO)
The multiplexer connects to an optional VCR through either the BNC or S-Video IN and
OUT connections.
MOUSE
As an alternative to the front panel buttons for operation, the menu operations can be
accessed through an option mouse.
ALARM IN/OUT
Alarming functions are accessed through the 50-pin alarm connector. Refer to the Alarm
Connections section on page 9 for more information on the pin out of the Alarm connector.
IN
IN
CAM 6
CAM 7
CAM 8
CAM 9
CAM 10
CAM 11
OUT
OUT
IN
IN
IN
CAM 12
CAM 13
CAM 14
CAM 15
CAM 16
OUT
OUT
OUT
1
3
MAIN
IN
VCR
OUT
AUX
2
4
MAIN
IN
OUT
MOUSE
ALARM IN/OUT
DC12V
OUT
IN
5
Advertisement
Table of Contents
Need help?
Do you have a question about the 4, 9, &16-ChannelTalon Triplex Color Multiplexers and is the answer not in the manual?