Zoom; Accept / Cancel / Arrow Buttons; Playback; Macro - ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual

ZOOM

The ZOOM function expands the selected portion of a full frame camera image in live mode.
Pressing the ACCEPT button increases the magnification factor up to 32x. Pressing the
CANCEL button decreases the magnification from the zoomed image down to the original
image. Holding down the ACCEPT or CANCEL buttons speeds up the zoom process. To
exit a zoomed image, press the ZOOM button again.

ACCEPT / CANCEL / ARROW Buttons

The ACCEPT, CANCEL, and ARROW buttons are described together because they can be
used in conjunction with each other while maneuvering through the setup menu, as well as
being used independently to handle other multiplexer options.
ACCEPT – brings up a pop-up menu when a camera view is highlighted, sets selections on
the OSD menu, and decreases numbers or values in the number setup function.
CANCEL – acts as an "ESC" button, clears cameo selections, and increases numbers or
values in the number setup function.
UP, DOWN, LEFT, RIGHT – the arrow buttons are used to move the cursor on the screen
Up, Down, Left or Right.

PLAYBACK

The PLAYBACK button is used to switch the multiplexer into the VCR playback mode or the
VCR preview mode. Pressing the button once puts it into the playback mode. Pressing the
2ND button then the PLAYBACK button switches the unit to the preview mode.

MACRO

The MACRO button allows the user to program a new macro or activate an already
programmed macro. To program a macro, go to the Setup menu and select Macro Setup.
When the setup screen appears select the Macro number you want to record, perform the
steps of the macro function, then return to the Macro Setup screen to stop recording. To
see the recorded macro, press the Macro button then the camera number button.

MONITOR

The MONITOR button is used to assign the camera view to one of the four spot monitor
outputs. To assign the output, select the Monitor button, then press the 1, 2, 3, or 4 camera
button to select one of the four output, then press the camera button corresponding to the
camera video that is to be assigned to the output.

ALARM

Allows the user to generate an alarm. Press the ALARM button, then a camera button to
place that camera in the alarm mode.

P.REC

The P.REC button activates the panic record mode. To interrupt the programmed record
settings and capture video on a specific camera, press the P.REC button then the camera
button number of the desired recording.
4