Product Overview; Front Panel Buttons; Display; Pip - ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual

4, 9, & 16-channel talon triplex color multiplexers

Hide thumbs

Table Of Contents

Table of Contents

This manual is to be used for all three models of the Triplex Color Multiplexers. The features

are the same with the exception of camera connection capability. This manual was written

based on the 16-channel unit. Note that some screens or option are not available for the 9 or 4-

channel units due to reduced camera connections.

Front Panel Buttons

The buttons on the front panel of the multiplexer are used to switch between display modes,

operate the features of the unit, and select between the various cameras (4, 9, or 16).

DISPLAY

The DISPLAY button cycles the monitor display through the various display modes. The

complete list of display modes for the 16-channel unit is: 16(4x4), 13(1+12), 10(2+8), 9(3x3),

7(3+4), and (2x2) in live mode. The display modes for the 9-channel unit are: 9(3x3),

7(3+4) and 4(2x2). The display mode for the 4-channel unit is: 4(2x2).

In the VCR playback mode, the available display modes are 4x4, 3x3, and 2x2 for the 16-

channel unit, 3x3 and 2x2 for the 9-channel unit, and 2x2 for the 4-channel unit.

PIP

The PIP button inserts a selected camera as a small image in a portion of the main screen.

Pressing the PIP button cycles through the PIP display option. To change the display in one

of the inset windows, select it using the front panel buttons.

NOTE: The PIP function is not operational during the VCR playback mode.

SEQUENCE

The SEQUENCE button activates the sequential viewing of cameras. Press the

SEQUENCE button while in the FULL SCREEN mode to start or stop the User Defined

Sequence.

FREEZE

The FREEZE button freezes the camera image(s) on the monitor display. The multiplexer

output for the VCR recording is still live during all display modes. Another push of this

button (or other buttons: ROTATE, DISPLAY, PIP, ZOOM, PLAYBACK) releases the freeze

mode.

ROTATE

The ROTATE mode changes the position of the inset display window on the screen for the

PIP, Dual PIP, and SQUISH screen displays.

CHAPTER 2