Motion Detection Setup - ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual

Motion Detection Setup

The Motion Detection Setup menu is used to set the motion detection feature ON or OFF.
Three additional submenu's provide further setting options for the index, scheduling, and
sensor options. The All Motion Detection option is a global switch that turns the motion
detection function ON or OFF for all cameras.
Motion Detection Index Setup
Normally, priority for motion detection is given equally to all cameras connected to the
multiplexer. The Motion Detection Index Setup screen however allows the user to provide
higher priority to a single camera within an area of the grid.
The screen shown above is used to set the priority of each camera (up to 128 index
positions).
The + and – options increment and decrement the camera number displayed in the box
centered between the two. The < and > arrows scroll through the camera array left to right.
Delete: The Delete option deletes the highlighted camera from the array.
Insert: The Insert option inserts a blank into the array.
End: The End option inserts an "E" into the array which set the end mark for the index
list.
View: The View option displays the Motion Detection Index List as shown in the
following figure.
24