Time Date Setup - ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual

Time Date Setup

The Time Date Setup screen is used to format the multiplexer's time and date settings and
to setup the daylight savings time option. The NEXT option at the bottom of the screen
leads to the Daylight Savings Time setup screen. The EXIT option saves the settings and
exits the Time & Date Setup screen.
Date Format: There are three date options to choose from where MM = month, DD = day,
and YYYY = year.
USA MM-DD-YYYY
EURO DD-MM-YYYY
ASIA YYYY-MM-DD
Hour Format: The hour format options are: "24 Hour" for military time, or "AM/PM" for clock
time.
Clock Source: The clock source options are Internal Clock and Network Clock. If the
multiplexer is connected to a network, set the option to Network Clock and the unit will
receive the clock information from the master multiplexer. Otherwise, set the clock source
option to Internal Clock.
Date Set: Use the arrow buttons on the front panel (or the mouse) to move the cursor
position for the year, month, and date. The ACCEPT button decreases the number. The
CANCEL button increases the number.
Time Set: Use the arrow buttons on the front panel (or the mouse) to move the cursor for
the hour, minutes, and seconds. The ACCEPT button decreases the number. The
CANCEL button increases the number.
12