Alarm Setup - ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual

To change the camera or dwell setting, use the arrow keys on the front panel (or the mouse)
to move the cursor to the option to be changed. Use the ACCEPT button to decrease and
the CANCEL button to increase the number selection.
The Page Dwell Time is the length of time each group of cameras will display. Use the Exit
button to save the settings and return to the main Setup menu.

Alarm Setup

When the Alarm Reset Button is set to ON, alarm events can be cleared using the front
panel buttons or the Pop Up menu. When set to OFF, the only way to clear the alarm is to
enter the Setup Menu.
The Alarm Screen Format option sets the display mode that the multiplexer defaults to when
an alarm occurs. The options are: Full, 2x2 Screen, 2x2 Assoc Scrn, 4x4 Screen, and
Unchanged (depending on the model).
The Alarm Dwell Time can be set from 1 to 99 seconds. The screen will automatically
sequence in a multi-alarm condition.
The Alarm setup screen has six sub-menu screens to setup alarm actions. These are
described in the following pages.
15