Camera Access Setup - ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual

Daylight Savings: If you are in an area that does not have Daylight Savings Time, set this
option to OFF. When you set this to ON, you must set the start and stop dates and times.
Start: Set the month and day (date) for the beginning of daylight savings time in your area.
Stop: Set the month and day (date) for the ending of daylight savings time in your area.
The BACK option at the bottom of the screen reverts back to the Time & Date Setup screen.
The EXIT option saves the settings and exits the Daylight Saving Setup screen.

Camera Access Setup

The Camera Access Setup screen is used to assign camera access to different users. It
permits or limits the display on Spot (auxiliary) monitors and designates whether a camera
can be recorded.
The window appearing on the Camera Access Screen shows the video display for the
selected camera. The arrow options under the window move the camera selection to the
beginning (<<) or end (>>) of the camera list and, move it back (<) one position or forward
(>) one position.
In the check box next to the options User 1 – User 4, Spot 1 – Spot 4, and Record Out, a
check mark ( √ ) activates the access for the user, monitor, or recording option for the
camera appearing in the window. A circle ( O ) restricts the access. The access settings
must be set for each camera.
The EXIT option saves the changes and returns the user to the main Setup Menu.
13