ATV 4, 9, &16-ChannelTalon Triplex Color Multiplexers Installation And Operating Instructions Manual page 26

Motion Action Setup
There are two screens for the Motion Action Setup as shown below. The Next and Back
buttons toggle between the two screens. The Exit button saves the settings and returns to
the main Alarm Setup menu.
Buzzer: When set to ON, the multiplexer's internal buzzer sounds upon a motion alarm
condition.
Alarm Screen: When set to ON, the screen display changes to the one defined in the
Alarm Screen Format menu during a motion alarm condition.
Network Relay: When set to ON, the multiplexer sends the alarm information to an
external relay box via the network during a motion alarm condition.
Message Latch: When set to ON, an "M" displays on the screen when a motion alarm
condition occurs. It remains on the screen until it is cleared.
Recording: This allows the user to select how video will be recorded during a motion
alarm condition. INT interleaves images from the camera with an alarm every other field,
thereby providing more images from the camera. When there are multiple alarms, the
cameras with alarms are interleaved. The ONLY option records images from only the
camera with an alarm condition. UNC leaves the recording parameters unchanged.
Spot Monitor 1 – 4: When set to ON, the Spot Monitor displays the camera with a
motion alarm condition. When there are multiple alarms, cameras with alarms will
display sequentially. When set to OFF, the Spot Monitor's display does not change
during a motion alarm condition. (1 AUX on 4-ch unit; 4 AUX on 9-ch and 16-ch units)
Relay: The relay options are: 1, 2, 1&2, and OFF. Selecting the 1 or 2 option sets
either internal relay 1 or 2 to be activated by the motion alarm. The 1&2 option sets both
the 1 and 2 internal relays as active during a motion alarm. When set to OFF, neither
internal relay is activated by the motion alarm.
Alarm Link: This option links the motion detection to the alarm action. IT can be set to
OFF or any one of the 16 alarm actions. All alarm actions take priority over motion
actions.
18