Honda Jazz Owner's Manual page 22

07/09/12 09:13:41 32SAA650_022
RELEASE BUTTON
If the seat belt touches or crosses
your neck, or if it crosses your arm
instead of your shoulder, you need to
adjust the seat belt anchor height.
To adjust the height of a front seat
belt anchor, squeeze the two release
buttons and slide the anchor up or
down as needed (it has four
positions).
Never place the shoulder portion of a
lap/shoulder belt under your arm or
This could cause
behind your back.
very serious injuries in a crash.
Protecting Adults
Using the Lap Belt
(For some types)
Insert the latch plate into the buckle
marked CENTER.
If the belt is too short, hold the latch
plate at a right angle and pull on the
plate to extend the belt. Then insert
the latch plate into the buckle, and
tug on the belt to make sure the belt
is securely latched.
CONTINUED
Driver and Passenger Safety
19