Honda Jazz Owner's Manual page 339

07/09/12 09:54:34 32SAA650_339
Lights
For some types
SOCKET
BULBS
SOCKET
336
Maintenance
4. Remove the burned out bulb by
pulling it straight out of its socket.
5. Install the new bulb in the socket.
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the socket into the light
assembly.
8. Reinstall the tail-light assembly
cover.
Replacing a Side Turn Signal Bulb
(For some types)
BULB
SOCKET
1. Push the front of the turn signal
assembly toward the rear of the
vehicle and pull the assembly out.
2. Turn the socket one-quarter turn
anticlockwise to remove it from
the lens.