Spark Plugs; Replacement - Honda Jazz Owner's Manual

07/09/12 09:50:03 32SAA650_306
The spark plugs in your vehicle
should be replaced according to the
time and distance recommendations
in the maintenance schedule.

Replacement

(Except 1.5 SOHC VTEC engine
model)
BOLTS
1. Remove the two holding bolts by
using a wrench. Remove the cover
by pulling it straight up.
2. Clean off any dirt and oil that have
collected around the ignition coils.

Spark Plugs

CONNECTOR
BOLT
LOCK TAB
IGNITION COIL
3. Use a wrench to remove the bolt
holding the ignition coil. Remove
the ignition coil by pulling it
straight out.
4. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
CONTINUED
Maintenance
303