Honda Jazz Owner's Manual page 201

Hide thumbs Also See for Jazz:
Table of Contents

Advertisement

07/09/12 09:36:22 32SAA650_201
Audio System (C Type)
Use the TUNE bar to tune
TUNE
the radio to a desired frequency.
Push the TUNE bar
higher frequency, or
lower frequency. Push the bar
until the display reaches the
desired frequency.
SEEK
The SEEK function
searches the band for a station with
a strong signal. To activate it, push
the SEEK bar
or
it. Depending on which part of the
SEEK bar you press, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
198
Comfort and Convenience Features
The SCAN function
SCAN
samples all the stations with strong
to tune to a
signals on the selected band. To
to tune to a
activate it, press the SCAN button,
or
then release it. The system will scan
up the band for a station with a
strong signal. When it finds one, it
will stop and play that station for
approximately 10 seconds. If you do
nothing, the system will then scan
for the next strong station and play
, then release
that for 10 seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Preset
frequencies of your favourite radio
stations in the six preset buttons.
Each button will store one frequency
on the AM band, and two
frequencies on the FM band.
You can store the
To store a frequency:
1.
Select the desired band.
2.
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
3.
Pick the preset button you want
for that station. Press the button
and hold it until you hear a beep.
4.
Repeat steps 1 to 3 to store the
desired station in all six preset
buttons.
Once a station's frequency is stored,
simply press and release the proper
preset button to tune to it.
The preset frequencies will be lost if
your vehicle's battery goes dead, is
disconnected, or the audio fuse is
removed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents