Headset Operation; Operating Range - VTech Cordless Telephone User Manual

Headset operation

Headset operation
You can use this telephone handsfree when you install
• To purchase a
any VTech 2 5 mm headset, purchased separately
headset, visit us on
Plug the headset into the jack located on the left side of
the web at www
the handset (under the small rubber flap). Do not force the
vtechphones com
connection, but make sure the plug fits securely.
or call VTech
Customer Service
at 1-800-595-
9511 In Canada,

Operating range

contact VTech
T h i s c o r d l e s s t e l e p h o n e o p e r a t e s w i t h i n
Telecommunications
Canada Ltd at www
t h e m a x i m u m p o w e r a l l o w e d b y t h e Fe d e r a l
vtechcanada com or
Communications Commission (FCC) Even so, this
1-800-267-7377
handset and base can communicate only over a certain
distance - which can vary with the locations of the base
and handset, the weather, and the construction of your
home or office.
If you receive a call while you are out of range, the
handset might not ring or if it does ring, the call might not
connect well when you press TALK Move closer to the
base, then press TALK to answer the call
If you move out of range during a phone conversation, you
might hear noise or interference To improve reception,
move closer to the base
If you move out of range without pressing OFF, the phone
will be left off the hook To hang up properly, walk back
into range, periodically pressing OFF
40 www vtechphones com