Headset Operation; Belt Clip - VTech VT5831 Manual

Hide thumbs Also See for VT5831:

Table of Contents

Your VT5831 cordless telephone is equipped with a 2.5mm Headset Jack for

use with an optional accessory Headset for hands-free operation. If you choose

to use the Headset option, you must obtain an optional accessory Headset, which

is compatible with the VT5831.

To purchase a Headset, call VTECH Customer Service at 1-800-595-9511.

Once you have a compatible 2.5mm Headset, locate the Headset Jack on the

VT5831 Handset. Connect the plug on the Headset cord to the jack on the cordless

Handset. The plug should fit securely. Do not force the connection.

Headset Operation

Operation

NOTE :

Whenever a compatible Headset is

connected to the cordless Handset,

the microphone on the Handset will be

muted. This is done to limit the effect

of background noise.

Many compatible Head-set have a

reversible, monaural design. You can

wear your Headset on either ear,

leaving one ear free for room

conversation.

The VT5831 is also equipped with a

detachable belt clip. Align the pins on

the inside edge of the clip with the

notches on the sides of the VT5831

Handset. The belt clip should snap

securely into place. Do not force the

connection.

Table of Contents