To Check Day And Time - VTech Cordless Telephone User Manual

Answering system operation
Before using the answering system, you should follow the steps to set the day and time, so messages
are dated correctly
• You can choose
1 Press TIME/SET, the system announces the current setting
to set the
time manually
2 Press TIME/SET again
following the
3 The answering system will announce the day of the current day setting Press CHANGE on
instruction on this
page, or you can
allow it to be set
4 Press TIME/SET, the system announces the current hour setting
automatically with
5 Press CHANGE until you hear the correct hour
incoming caller
6 Press TIME/SET, the system announces the current minute setting
ID information
7 Press CHANGE until you hear the correct minute
Caller ID is a
subscription
8 Press TIME/SET, the system announces the current year setting
service, fee
9 Press CHANGE until you hear the correct year
required
10 Press TIME/SET to confirm, the system will announce the new setting. You'll hear a confirmation
• In the event of a
power outage, the
day and time will
Pressing and holding the CHANGE button when setting the time and date will advance the minutes
need to be reset
or years by increments of 10

To check day and time

Press TIME/SET at any time to listen to the current setting without changing it
28
the base until you hear the correct setting
tone
www vtechphones com