Call Screening; Access Code; Set Remote Access - VTech Cordless Telephone User Manual

Hide thumbs Also See for Cordless Telephone:

Table of Contents

Answering system operation

Call screening

If you wish to listen to caller's leaving their message before choosing to answer a call, follow these

steps:

1 Set the playback VOL on the base unit to a level greater than 1 by

pressing

2 If you decide to answer a call while the caller is leaving a message,

simply press TALK/FLASH on the handset The answering system will

stop and you can begin speaking to the caller

To retrieve new messages from any touch tone phone from a remote

location, an access code is required The remote access code can be

any two digit number between 10 and 99 The remote access code has

been set to 19 at the factory but it can be changed at any time for your

convenience

Setting the remote access

1 Press SETUP twice, the system announces "Remote access code. To change the setting, press

CHANGE."

2 Press CHANGE, the system announces the current setting (the default remote access code is

19 )

3 Press and release CHANGE to advance the remote access code number by one Press and hold

CHANGE to advance the remote access code by 10

4 When the desired number is announced Press SETUP to save and advance to the next menu

option Or press PLAY/STOP

to save and exit

www vtechphones com

Table of Contents

Show Quick Links

Table of Contents