Headset Operation; Belt Clip - VTech gz2436 User Manual

Headset Operation

Your gz 2436 Handset is equipped with a 2.5mm Headset Jack for use with an optional
accessory Headset for handsfree operation. If you choose to use the Headset option,
you must obtain an optional accessory Headset, which is compatible with the gz 2436.
For best results, use a VTech 2.5mm headset.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the gz 2436
Handset. Connect the plug on the Headset cord to the jack (under a small rubber flap)
on the cordless Handset. The plug should fit securely. Do not force the connection.
NOTE:
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Handset will be
muted. This is done to limit the effect
of background noise.

Belt Clip

The gz 2436 is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches
on the sides of the Handset. The belt
clip should snap securely into place. Do
not force the connection.
19