Advance Operation; Headset Operation; Belt Clip - VTech i 5808 User Manual

5.8 ghz premium cordless system full colour accessory handset

Hide thumbs Also See for i 5808:

Table of Contents

Your i 5808 handset is equipped with a 2.5mm headset jack for use with an optional

accessory headset for handsfree operation. If you choose to use the headset option,

you must obtain an optional accessory headset, which is compatible with the i 5808.

For best results, use a VTech 2.5mm headset.

To purchase a headset, visit us on the web at www.vtechcanada.com or call VTech

Customer Service at 1-800-267-7377.

Once you have a compatible 2.5mm headset, locate the headset jack on the i 5808

NOTE:

Whenever a compatible headset is connected

to the cordless handset, the microphone on

the handset will be muted. This is done to

limit the effect of background noise.

Many compatible headsets have a reversible,

monaural design. This means you can wear

your headset on either ear, leaving one ear

free for other conversations.

The i 5808 is also equipped with a

detachable belt clip. Align the pins on the

inside edge of the clip with the notches

on the sides of the Handset. The belt clip

should snap securely into place. Do not

force the connection.

Table of Contents