1800Sr3 Bimini Top (If Equipped) - Maxum 2200SR3 Owner's Manual

Chapter 7: Deck Equipment

1800SR3 Bimini Top (If Equipped)

Installing the Bimini Top
1. Slide the swivel ends of the main bow (A) over the holes in the side windshield frames and insert the
securing pins.
2. Insert the end eyes of the aft braces (B) into the aft deck hinges and secure them with the spring loaded pins.
3. Unfold the canvas and slide the end eyes of the forward braces (C) into the forward deck hinges and secure them
with the spring loaded pins.
4. If the bimini top does not have a smooth, taut look, tighten the top straps (not shown) by adjusting the
strap buckles.
• Since the jaw slides (D) were preset during manufacturing they should not need to be adjusted.
• However, if you think the jaw slides need to be adjusted, obtain the measurements from your selling dealer.
36
END EYE (TYPICAL)
SPRING LOADED SECURING PIN (TYPICAL)
HINGE (TYPICAL)
B
D
SWIVEL END
A
SECURING PIN
C