2100Sc Bimini Top (If Equipped) - Maxum 2200SR3 Owner's Manual

2100SC Bimini Top (If Equipped)

C
G
D
Installing the Bimini Top
1. Slide the swivel ends of the main bow (A) over the aft holes (B) in the side windshield frames and insert the
securing pins.
2. Hook the aft strap (C) into the deck loops (D).
3. Unfold the canvas and slide the swivel ends of the forward braces (E) over the forward holes (F) in the side wind-
shield frames and insert the securing pins.
4. Adjust the aft strap buckles (G) as necessary.
5. If the bimini top does not have a smooth, taut look, tighten the top straps (not shown) by adjusting the
strap buckles.
• Since the jaw slides (H) were preset during manufacturing they should not need to be adjusted.
• However, if you think the jaw slides need to be adjusted, obtain the measurements from your selling dealer.
A
B
H
SWIVEL END
E
F
Chapter 7: Deck Equipment
SECURING PIN
37