Canvas & Vinyl Tops & Enclosures; Forward Bimini Top - Maxum 2400 SC Owner's Manual Supplement

Canvas & Vinyl Tops & Enclosures
PRODUCT or PROPERTY DAMAGE HAZARD!
Take down and securely stow ALL canvas & vinyl BEFORE your boat is transported by road.
BEFORE cleaning and/or stowing your canvas or vinyl, read the sections later in this chapter,
Canvas Care and Vinyl Care.
Two people are needed for most of the tasks listed in this section.
Some canvas and vinyl options may not be described. Make sure your dealer explains how to
install all canvas and vinyl.

Forward Bimini Top

1. Insert the balls of the main bow (A) into
the aft sockets on the windshield frame
and secure them with the pins.
2. Insert the end eyes of the aft braces (B)
into the deck hinges and secure them
with the pins.
3. Unclip the forward braces (C) from the
clips (D) and pull the canvas forward.
4. Insert the balls of the forward braces into
the forward sockets (not shown) on the
windshield frame and insert the securing
pins.
• The jaw slides (E) should not need to be
adjusted.
• If you decide to adjust the jaw slide posi-
tions, get the correct measurements from
your selling dealer.
• If other canvas (i.e. side curtains or slant
back cover) is installed, the canvas top
may need adjustment to align the snaps on
the canvas with the snaps on your boat.
! CAUTION
NOTICE
NOTICE
NOTICE
D
SECURING PIN
Chapter 7: Deck Equipment
E
C
E
A
BALL
SOCKET
DECK END EYE SECURING
HINGE
B
PIN
35