Chapter 7: Deck Equipment
1800MX Bimini Top (If Equipped)
1. Insert the end eyes of the
main bow (A) into the
deck hinges located next
to the aft ends of the
windshield frames and
secure them with the
spring loaded pins.
2. Insert the end eyes of the
aft braces (B) into the aft
deck hinges and secure
them with the spring
loaded pins.
3. Unfold the canvas and
insert the end eyes of the
forward braces (C) into
the hinges located on top
of the windshield frames
and secure them with the
spring loaded pins.
• The jaw slides (D) should
not need to be adjusted.
• If you decide to adjust the
jaw slide positions, obtain
the correct measurements
from your selling dealer.
1800SR3 Bimini Top (If Equipped)
1. Slide the wind-
shield hinges of the
main bow (A) over
the holes in the side
windshield frames
and secure with the
attached pins.
2. Insert the end eyes
of the aft braces (B)
into the aft deck
hinges and secure
them with the
spring loaded pins.
3. Unfold the canvas
and slide the end
eyes of the forward
braces (C) into the
forward deck
hinges and secure
them with the
spring loaded pins.
• The jaw slides (D)
should not need to
be adjusted.
• If you decide to adjust the jaw slide positions, obtain the correct measurements from your selling dealer.
60
D
B
B
D
END EYE
SPRING LOADED
SECURING PIN
DECK HINGE
(TYPICAL,
4 - PLACES)
A
END EYE
SPRING LOADED
SECURING PIN
DECK HINGE
(TYPICAL,
4 - PLACES)
A
C
C
WINDSHIELD HINGE
(TYPICAL, 2 - PLACES)
SECURING PIN