1800MX Bimini Top (If Equipped)
Installing the Bimini Top
1. Insert the end eyes of the main bow (A) into the deck hinges (B) located next to the aft ends of the windshield
frames and secure them with the pins.
2. Insert the end eyes of the aft braces (C) into the aft deck hinges (D) and secure them with the pins.
3. Unfold the canvas and insert the end eyes of the forward braces (E) into the hinges (F) located on top of the
windshield frames and secure them with the pins.
4. If the bimini top does not have a smooth, taut look, tighten the top straps (not shown) by adjusting the
strap buckles.
• Since the jaw slides (G) were preset during manufacturing they should not need to be adjusted.
• However, if you think the jaw slides need to be adjusted, obtain the measurements from your selling dealer.
END EYE (TYPICAL)
SPRING LOADED SECURING PIN (TYPICAL)
HINGE (TYPICAL)
A
G
C
D
B
Chapter 7: Deck Equipment
E
F
35