Id Number Setting; Video Wall Setting - Pioneer PDP-61MXE1 Technical Manual

Menu Mode

ID number setting

When using more than one of these displays, this function
sets ID numbers so that operation of the remote control does
not cause multiple monitors to operate at the same time.
Example: Setting "2"
Set "ADVANCED OSD" to "ON" in the main menu (1/2),
then perform the following operations.
On "ID NUMBER" of "OPTION3" menu, select "2".
PREVIOUS PAGE
TIMER
PWR. ON MODE
KEY LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
SEL.
ADJ.
* To reset back to ALL
Press the CLEAR button.
Information
7 ID NUMBER settings
ALL: ID NUMBER will not be set.
1 to 256: ID NUMBER will be set.
7 When the ID NUMBER have been set
You can also set ID NUMBER for each remote control to
operate the plasma display individually. To do so, see below.
To set the ID number for the remote control
Example: Setting "2"
Press the ID NO. SET button on the remote control.
The "ID NO. SET" screen appears.
On "ID NUMBER" of "ID NO. SET" menu, select "2".
POSITION :
ID NUMBER
ADJ.
* To reset back to ALL
Press the CLEAR button.

Video Wall setting

When creating a video wall, use a distribution amplifier
(any commercially available distribution amplifier) to
connect the split signals to the respective monitor INPUT
terminals.
Use this feature to configure a 4-25 video wall.
Set "ADVANCED OSD" to "ON" in the main menu (1/2),
then perform the following operations.
On "OPTION3" menu, select "VIDEO WALL", then press
the MENU/SET button.
The "VIDEO WALL" screen appears.
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
SCREEN
P. ON DELAY
ABL LINK
REPEAT TIMER
SEL.
ADJ.
56
3 / 3
OPTION3
: LAST
: OFF
: ON
: OFF
: 2
EXIT RETURN
ID NO.SET
1
: 2
EXIT RETURN
: 1
: NORMAL
: OFF
: OFF
: OFF
: OFF
EXIT RETURN
Note: A contingency method of shutting off the electric
power should be used in cases of emergency during video
wall setup.
DIVIDER
Set the 4-25 video wall.
Example: Setting "4"
On "DIVIDER" of "VIDEO WALL" menu, select "4".
VIDEO WALL
DIVIDER
POSITION
DISP. MODE
AUTO ID
SCREEN
P. ON DELAY
ABL LINK
REPEAT TIMER
SEL. ADJ.
Information
7 DIVIDER settings
OFF, 1: 1 Screen (Matrix display function does not work)
4: 4 Screens (2×2 video wall)
9: 9 Screens (3×3 video wall)
16: 16 Screens (4×4 video wall)
25: 25 Screens (5×5 video wall)
* When you select 4-25, set the VIDEO WALL
POSITION.
VIDEO WALL POSITION
Set the position of each display.
Example: Setting "4"
On "VIDEO WALL" menu, select "POSITION", then press
the MENU/SET button.
The "VIDEO WALL POSITION" screen appears.
Select "NO. 4" of "POSITION NO.".
VIDEO WALL POSITION
POSITION NO.
ADJ.
Information
7 VIDEO WALL POSITION settings
1 Screen: There is no need to set POSITION.
4 Screens
NO. 1 NO. 2
NO. 4 NO. 3
16 Screens
NO. 16 NO. 17 NO. 18 NO. 19
NO. 20 NO. 21 NO. 22 NO. 23
NO. 24 NO. 25 NO. 26 NO. 27
NO. 28 NO. 29 NO. 30 NO. 31
: 4
: NORMAL
: OFF
: OFF
: OFF
: OFF
EXIT RETURN
4
EXIT RETURN
9 Screens
NO. 9
NO. 7 NO. 8
NO. 12
NO. 10 NO. 11
NO. 14 NO. 15
NO. 13
25 Screens
NO. 32 NO. 33 NO. 34 NO. 35 NO. 36
NO. 37 NO. 38 NO. 39 NO. 40 NO. 41
NO. 42 NO. 43 NO. 44 NO. 45 NO.46
NO. 47 NO. 48 NO. 49 NO. 50 NO. 51
NO. 52 NO. 53 NO. 54 NO. 55 NO. 56