Multi Mode Request; Auto Id Set Start - Pioneer PDP-61MXE1 Technical Manual

66. MULTI MODE Request

Function
It requests the MULTI MODE status of the display in
response to a request for MULTI MODE information of
the external control apparatus.
Transmit Data
1FH 80H 60H 3BH 00H CKS
ACK
7FH 60H 80H 3BH 03H DATA00 DATA01 DATA02 CKS
DATA00 (SCREEN DIVIDER SETTING)
01H : single mode
02H : multi-mode 1 screen
03H : multi-mode 4 screen
04H : multi-mode 9 screens
05H : multi-mode 16 screens
06H : multi-mode 25 screens
DATA01 (POSITION OF DIVIDE)
Note : When DATA00 is 1H, these data are invalid.
01H : upper left screen selection (4 screens)
02H : upper right screen selection (4 screens)
03H : lower right screen selection (4 screens)
04H : lower left screen selection (4 screens)
07H : top level left screen selection (9 screens)
08H : top level middle screen selection (9 screens)
09H : top level right screen selection (9 screens)
0AH : middle level left screen selection (9 screens)
0BH : middle level middle screen selection (9 screens)
0CH : middle level right screen selection (9 screens)
0DH : bottom level left screen selection (9 screens)
0EH : bottom level middle screen selection (9 screens)
0FH : bottom level right screen selection (9 screens)
10H : position 1(16 screens, see Fig. 1)
11H : position 2(16 screens, see Fig. 1)
:
18H : position 9(16 screens, see Fig. 1)
19H : position 10(16 screens, see Fig. 1)
:
1FH : position 16(16 screens, see Fig. 1)
20H : position 1(25 screens, see Fig. 2)
21H : position 2(25 screens, see Fig. 2)
:
29H : position 10(25 screens, see Fig. 2)
2AH : position 11(25 screens, see Fig. 2)
:
32H : position 19(25 screens, see Fig. 2)
33H : position 20(25 screens, see Fig. 2)
:
38H : position 25(25 screens, see Fig. 2)
1 2 3 4
6 7 8 9
11 12 13 14
16 17 18 19
Fig.1
DATA02 (display mode)
00H : normal
01H : blank
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
Fig.2
RS-232C Adjustment Mode

67. AUTO ID SET START

Function
The external control apparatus automatically sets ID for
multiple displays.
Transmit Data
5FH 80H 60H F0H 01H DATA00 CKS
DATA00 00H–FFH : setting master ID
*: When used as a multi-system, remove the link input of the
master.
68. ABL LINK
Function
The external control apparatus sets similar ABL links for
the multiple displays.
Transmit Data
DFH 80H 60H F1H 03H DATA00–DATA02 CKS
DATA00 00H : link on
01H : link off
DATA01 FFH
DATA02 FFH
*: This command is premised on the system configuration of the
multiple displays being a multi-system. If during PLE link
implementation, PSC data has not been changed by this
command for a stipulated period (about 2 seconds), each display
sets PSX data to FFH. Because this command is a one-way
command, there is no ACK.
69. VIDEO WALL SETTING
Function
The external control apparatus sets multiple displays as a
multi-system.
Transmit Data
DFH 80H 60H F3H 03H DATA00 DATA01 DATA02 CKS
DATA00 : 01H : 1 screen configuration
04H : 4 screen multi-configuration
09H : 9 screen multi-configuration
DATA01 : 00H : constant
DATA02 : 01H : video1
02H : video2
03H : video3
04H : COMPNT1
05H : COMPNT2
06H : COMPNT3
07H : PC1DSUB
08H : PC2-BNC
09H : PC3-DVI
* After executing AUTO ID, transmit this command.
81