Ceiling Suspension (With Wires) - Pioneer PDP-61MXE1 Technical Manual

Special Installation (Ceiling suspension (with wires))

2.4.4 Ceiling suspension (with wires)

When suspending it from a ceiling with wire, the unit must be attached at four or more points with these points distributed
symmetrically on both sides of the vertical and horizontal center lines.
A
When suspending from a ceiling with wire, use the brackets shown below to prevent concentrating loads on the upper two
fixing points.
For additional safety, secure the wires to separate fittings or parts of the ceiling.
Use mounting screws of material stronger than soft steel, and use hexagonal bolts.
Use wires adequate for the combined weight of the unit 61.0 kg and the weight of the support brackets.
No!
When installing the plasma display, do not use the handles as means of hanging the display.
Screws
Brackets
✩ Operating Temperature Restrictions
• Ambient temperature: 0 to 40 °C
24
Attach this fan on the left side
B
Wires
Brackets
A
Wires
B
Screws