Anchoring Pc And Similar Apparatuses - Pioneer PDP-61MXE1 Technical Manual

2.2.4 Anchoring PC and similar apparatuses

These holes are used to anchor and attach a PC or other apparatus.
They are M4 bolt holes x4, their horizontal pitch is 445mm and vertical pitch is 102mm.
Usage limitations:
• It is less than 10kg.
• If it covers a ventilation opening on the back cover of the plasma display, it is at least 10mm above the opening.
• The external temperature of the outside of the PC etc. that is installed is a maximum of 50°C at a surrounding
temperature of 40°C or less.
The holes can also be used to help prevent the plasma display from falling over (Refer to "2.3.3 How to use the safety
metal fittings and the screws for safety metal fittings (pg. 18)")
But the plasma display cannot be anchored to and installed on a wall using only these holes.
An apparatus is installed only by a service man, so nobody except a serviceman may install one.
M4x4
445
Installation Conditions
17