Setting The Screen Size For S1/S2 Video Input; Setting The Picture Size For Rgb Input Signals; Setting The Signal And Black Level For Dvi Signal - Pioneer PDP-61MXE1 Technical Manual

Setting the screen size for S1/S2 video input

If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is input
via the VIDEO3 terminal.
Example: Setting "S1/S2" to "AUTO"
Set "ADVANCED OSD" to "ON" in the main menu (1/2),
then perform the following operations.
On "S1/S2" of "OPTION2" menu, select "AUTO".
PREVIOUS PAGE
PWR. MGT.
PURECINEMA
LONG LIFE
SIDE MASK
S1/S2
PICTURE SIZE
DVI SET-UP
NEXT PAGE
SEL. ADJ.
Information
7 S1/S2 settings
AUTO: Adjusts the screen size automatically according
to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.

Setting the picture size for RGB input signals

Use this procedure to switch the setting to "ON" or "OFF".
Example: Setting the "PICTURE SIZE" mode to "OFF"
Set "ADVANCED OSD" to "ON" in the main menu (1/2),
then perform the following operations.
On "PICTURE SIZE" of "OPTION2" menu, select "OFF".
PREVIOUS PAGE
PWR. MGT.
PURECINEMA
LONG LIFE
SIDE MASK
S1/S2
PICTURE SIZE
DVI SET-UP
NEXT PAGE
SEL. ADJ.
See page 42 for the details of the above settings.
2 / 3
OPTION2
: OFF
: ON
: 3
: AUTO
: ON
EXIT RETURN
OPTION2 2 / 3
: OFF
: ON
: 3
: OFF
: OFF
EXIT RETURN

Setting the signal and black level for DVI signal

Choose the signal for the DVI connector (PC or STB/DVD)
and set the black level.
Example: Setting the "PLUG/PLAY" mode to "STB/
DVD"
Set "ADVANCED OSD" to "ON" in the main menu (1/2),
then perform the following operations.
On "OPTION2" menu, select "DVI SET UP", then press the
MENU/SET button.
The "DVI SET UP" screen appears.
On "PLUG/PLAY" of "DVI SET UP" menu, select "STB/
DVD".
DVI SET-UP
PLUG/PLAY
BLACK LEVEL
SEL. ADJ.
Information
7 PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to "LOW" automatically.
STB/DVD: When connected to the SET TOP BOX, DVD etc.
BLACK LEVEL is set to "HIGH" automatically.
7 BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD etc.
Change "HIGH" into "LOW" if the black level appears gray.
Menu Mode
: STB/DVD
: HIGH
EXIT RETURN
53