Cooling/Heating/Fan Only Operation; Dehumidifying Operation - Kelvinator KSV26CRE User Manual

Dehumidifying operation

The DEHUMIDIfY mode works based on the difference
between the set temperature and the actual room temperature.
The temperature is regulated while dehumidifying through
repeatedly turning on/off of the COOLING operation on or
off, or by turning the FAN only operation on or off.
fan
programmed temperature
Start
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the indoor
unit starts flashing.
1 ON/OFF Button
Press this button to turn the air conditioner on. The
temperature indicator on the indoor unit display lights up.
2 MODE Button
Press to select DEHUMIDIfY.
3 CONTROl Buttons
Set the desired temperature (normally, set between
21ºC to 28ºC).
2
1
3
Stop
1 ON/OFF Button
Press this button again to turn the air conditioner off. The
horizontal louvre returns to the closed position upon
shut down.
tips and information
In DEHUMIDIFY mode the fan speed is fixed at low, and
Turbo function can be used.
10 Operating the air conditioner Kelvinator Air Conditioning
cooling fan cooling
time
Fan operation
When you select the FAN operating mode the air conditioner
will recirculate the indoor air.
1 ON/OFF Button
Press this button to turn the air conditioner on. The
temperature indicator on the indoor unit display lights up.
2 MODE Button
Press to select FAN.
3 FAN Button
Press to select the desired fan speed at: Auto, Low,
Medium and High. The default fan speed is Auto.
2
1
3
Stop
1 ON/OFF Button
Press this button again to turn the air conditioner off. The
horizontal louvre returns to the closed position upon
shut down.
tips and information
The temperature cannot be set through the remote control
in FAn operating mode.
no fan speed indication displays on the remote control if
Auto fan speed is selected.