Kelvinator KSV26CRE User Manual page 8

Remote control display indicator
1
2
3
4
5
6
7
8
14
1 TRAnSMISSIOn Indicator
Displays when the remote control transmits signals to the
indoor unit.
2 TURBO Display
Displays when TURBO function is active.
3 I FEEl Display
Displays when the I FEEl function is active.
4 ECO Display
Displays when ECO function is active.
5 ACTIVE PlASMA Display (Active Plasma models only)
Displays when ACTIvE PLASMA function is selected. This
function is not available for this range of air conditioners.
6 Room Temperature Display
Displays when the temperature shown on the lCD
screen is room temperature. It can be switched on/off by
pressing the TEMP button.
7 Programmed TEMPERATURE Display
lights up when the remote control displays the set
temperature. It can be switched on/off by pressing the
TEMP button.
8 Using the remote control Kelvinator Air Conditioning
8 TIMER On/OFF Display
9
Displays when the Timer On/Off function is activated.
10
9 FAn SPEED Display
11
Displays the selected fan speed in the following
sequence:
12
lOW
and AUTO. In Auto speed, only the
13 is displayed.
10 SWInG Display
Displays when the SWING function is selected.
11 X-FAn Display
Displays when the X-Fan function is activated by pressing
Turbo and Healthy buttons at the same time (for models
with active plasma function) or by pressing X-Fan button
(for models without active plasma function).
12 TEMPERATURE Display
Displays the room or set temperature in °C or ºF.
No display in Fan mode.
13 TIME Display
Displays the Clock time (must be set) and/or the on/off
time of the timer.
14 MODE Display
Displays the current operation mode, including
Auto (
Heat (
NOTE: The Cool model does not offer a Heating option.
MEDIUM
), Dehumidify ( ), Fan (
).
HIGH
symbol
), Cool ( ) and