Disassembly For Repair; Disassembly Procedure (Tk-5710 (B)) - Kenwood TK-5710 Service Manual

( )
TK-5710 B

Disassembly Procedure (TK-5710 (B))

■ Removing the upper/ lower case and shield cover
1. Remove the 9 screws z and 9 spacers x.
2. Remove the upper case c and lower case v.
3. Remove the upper packing b and lower packing n.
4. Remove the shield cover m.
■ Removing the TX-RX unit (X57-703)
1. Remove the 7 screws , holding the PLL shield cover.
2. Remove the PLL shield cover ..
3. Remove the coaxial cables from the two connectors
(CN150, CN200) of the TX-RX unit /.
4. Remove the flat cables from the two connectors (CN600,
CN601) of the TX-RX unit Ω.
5. Remove the 5 screws ≈.
20
( )
/5710H B

DISASSEMBLY FOR REPAIR

8
8
8
8
8
9
11
10
10
CN150
TX-RX
unit
12
CN601
12
CN200
12
11 16
CN600
CN702
Control
unit
■ Removing the Final unit (X45-375)
1. Remove the cables from the connector (CN702) of the
control unit ç.
2. Remove the 2 screws √ holding the power module.
3. Remove the solder of the power module with a solder
absorber.
4. Remove the 2 screws ∫ holding the + (positive) terminal
and - (negative) terminal of the power supply cable.
5. Remove the 8 screws ~ holding the final unit.
6. Remove the solder of the antenna receptacle with a
solder absorber.
15
15
4
6
14
14
16
16
16
Final unit
13
3
2
2
1
1
1
2
1
2
7
5
2
2
1
2
1
1