Kenwood TK-5710 Service Manual page 66

( )
TK-5710 B
Item
12.MSK 1) Adj item:[W MSKW]
deviation Adjust:[***]
adjust Deviation meter filter
•Wide LPF:15kHz
HPF:OFF
PTT:ON
Press [PF5] to store the adjust-
ment value after adjustment.
•Narrow 2) Adj item:[N MSKN]
Adjust:[***]
PTT:ON
Press [PF5] to store the adjust-
ment value after adjustment.
13.Single tone 1) Adj item:[W 2TNW]
deviation Adjust:[***]
adjust Deviation meter filter
•Wide LPF:15kHz
HPF:OFF
PTT:ON
Press [PF5] to store the adjust-
ment value after adjustment.
•Narrow 2) Adj item:[N 2TNN]
Adjust:[***]
PTT:ON
Press [PF5] to store the adjust-
ment value after adjustment.
Receiver Section
Item
1. RX [Panel tuning mode]
Front-end 1) Adj item:[W FEND]
adjust Adjust:[***]
2) Adj item:[WL FEND]t
[WLC FEND]t[WC FEND]t
[WCH FEND]t[WH FEND]
66
( )
/5710H B
ADJUSTMENT
Measurement
Condition Test-
equipment
Power meter Rear
Deviation
meter
Oscilloscope Front
AG
AF VTVM
Measurement
Condition Test-
equipment
SSG
Unit Terminal Unit
ANT Front [PF3],
panel panel [PF4]
MIC jack
panel
Unit Terminal Unit
Rear ANT Front [PF3],
panel panel [PF4]
Adjustment
Specifications/Remarks
Parts Method
3.0kHz ±100Hz
1.5kHz ±50Hz
3.0kHz ±100Hz
1.5kHz ±50Hz
Adjustment
Specifications/Remarks
Parts Method
Enter the following Note: After replacing the
adjustment values
to the transceiver
by pressing [PF3]
and [PF4] keys.
[WL FEND] : 190
[WLC FEND] : 160
[WC FEND] : 110
[WCH FEND] : 65
[WH FEND] : 10
After setting the
adjustment value,
press [PF5] key.
The adjustment
value will be stored
in memory.
EEPROM (IC701)
align RX Front-end.