System Set-Up; Before Reading About System Set-Up - Kenwood TK-5710 Service Manual

( )
TK-5710 B

Before Reading About System Set-up

The TK-5710(B)/5710H(B) is a transceiver main unit
(without a panel or speaker) that you complete by adding
options.
The options are classified into three types according to
operation and function.
Merchandise received
License and frequency allocated by FCC
Choose the type of transceiver
TK-5710(B) or TK-5710H(B) is complete by combining
options with only the transceiver body (without panel)
Are you using the remote kit?
See page 11
Please refer to the
KCH-14/15 service manual
(B51-8728-00) for serving
information, such as circuit
diagram, parts list and etc.
KCH-14 (Basic model)
Front panel kit
Are you using the printed keytops?
See page 11
Supplied accessory keytops
4
( )
/5710H B

SYSTEM SET-UP

YES
NO
See page 11
Please refer to the
KCH-14/15 service manual
(B51-8728-00) for serving
information, such as circuit
diagram, parts list and etc.
KCH-15 (Full-featured
model) Front panel kit
NO
YES
Transceiver programming
KCT-23 DC cable
Are you using the voice guide & storage unit?
NO
Are you using the external speaker?
NO
Are you using the keypad microphone?
NO
Delivery
1. Install the front panel kit (controller) directly on a radio to
operate it. (Form : Radio + KCH-14/15)
2. Remotely control one radio with one controller. (Form
: Radio + KRK-5 + KCH-14/15 + KCT-22M/M2/M3)
3. Remotely control one radio with two controllers. (Form
: Radio + KRK-6DH + KCH-14/15 (two) + KCT-22M/M2/
M3 (two))
Frequency range
RF power
136~174MHz 50W TK-5710(B) K
136~174MHz 110W TK-5710H(B) K
Are you using one radio with two controllers?
Are you using one radio
with one controller?
YES See page 12
Please refer to the
KRK-5/6DH service manual
(B51-8445-20) for serving
information, such as circuit
diagram, parts list and etc.
KRK-5
Single control head remote kit
(Option)
or
KCH-14 KCH-15
KCT-22M/M2/M3
Control cable
See page 5
A personal computer (IBM PC or compatible), programming
interface (KPG-43), and programming software (KPG-95D) are
required for programming. (The frequency and signaling data
are programmed for the transceiver.)
KCT-23 M,M3 : TK-5710(B), KCT-23 M2,M4 : TK-5710H(B)
YES
VGS-1
YES
KES-5 or KES-6
YES
KMC-28
Type
YES
See page 14
Please refer to the
KRK-5/6DH service manual
(B51-8445-20) for serving
information, such as circuit
diagram, parts list and etc.
KRK-6DH
Dual control head remote kit
(Option)
or or
KCH-14
KCH-14 KCH-15
+
+ +
KCH-14 KCH-15 KCH-15
See pages 13 and 14
See page 16
(Option)
See page 17
(Option)
(Option)
Desk top microphone KMC-9B
Service manual parts No. list
Model Parts No.
KRK-5/6DH B51-8445-20
KCH-14/15 B51-8728-00