Firmware Information Mode; Clock Adjustment Mode; Self Programming Mode Flow Chart - Kenwood TK-5710 Service Manual

( )
TK-5710 B

Self programming mode flow chart

●
[PF2]
[TX Frequency] : "OFF"
[Channel Type] : "ANALOG"
[PF2]
[Channel Type] : "ANALOG"
[PF2]
[TX Frequency] : "OFF"
Talkgroup ID List Amount : 0
or
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
[TX Mode] : "ANALOG"
Talkgroup ID List Amount : 0
[PF2]
Talkgroup ID List Amount : 0

10. Firmware Information Mode

Press and hold the [PF3] key while turning the transceiver
power ON and then keep pressing and holding the [PF3] key,
the firmware version information appears on the LCD.

11. Clock Adjustment Mode

11-1. Flow chart of operation
10
( )
/5710H B
REALIGNMENT
[GRP ] + Power ON
^
Input Password
Self programming mode
[PF2]
[TX Frequency] : "OFF"
or
[Channel Type] : "ANALOG" or "APCO"
Channel Spacing
[PF2]
[Channel Type] : "APCO"
[PF2]
[TX Frequency] : "OFF"
[Channel Type] : "APCO" or "MIXED"
or
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
[TX Mode] : "APCO"
[PF2]
[TX Frequency] : "OFF"
Talkgroup ID List Amount must not be 0.
or
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
[TX Mode] : "ANALOG"
Talkgroup ID List Amount must not be 0.
Talkgroup List No.
Read authorization password entry (6 digits)
[PF2]
[PF2]
Zone/Channel Zone selection
[PF2] When the [PF4] key is pressed,
new data is written into memory.
RX Frequency
[PF2]
TX Frequency
OFF
[PF4]
[PF2]
Channel Type
[PF2]
[TX Frequency] : Other than "OFF"
[Channel Type] : "MIXED"
TX Mode
[PF2]
[PF2]
[Channel Type] :
"ANALOG" or "MIXED"
RX Signaling OFF
[PF2]
[TX Frequency] : Other than "OFF"
[Channel Type] : "ANALOG" or "MIXED"
[TX Mode] : "ANALOG"
TX Signaling OFF
[PF2]
[Channel Type] : "MIXED"
RX NAC
[PF2]
[TX Frequency] : Other than "OFF"
[Channel Type] : "APCO" or "MIXED"
If [Channel Type] is set to "MIXED",
[TX Mode] must be set to "APCO".
TX NAC
[PF2]
[Channel Type] : "APCO" or "MIXED"
Talkgroup ID List Amount must not be 0.
[PF2]
[PF4] + Power ON
YEAR
[PF2]
MONTH
[PF2]
DAY
[PF2]
HOUR
[PF2]
MINUTE
[PF2]
[PF3]
Channel selection
[PF3]
[PF3]
ANALOG APCO
[PF3]
ANALOG APCO
[PF3]
*1
25.0kHz
*1 [Channel Type] : "ANALOG" or "MIXED"
[PF3]
*2
APCO 12.5kHz
*2 [Channel Type] : "APCO"
QT DQT N
[PF4] [PF4]
[PF4]
QT DQT N
[PF4] [PF4]
[Selector] or [GRP ^ ] and [GRP ]
[Selector] or [GRP ] and [GRP ]
^
[Selector] or [GRP ] and [GRP ]
^
[Selector] or [GRP ] and [GRP ]
^
[Selector] or [GRP ] and [GRP ]
^
Completion
[PF3]
MIXED
12.5kHz
12.5kHz
[PF4]
DQT I
[PF4]
DQT I
[PF4]