Disassembly For Repair - Kenwood TK-3501 Service Manual

TK-3501
FPU
PC
D-SUB
(9-pin)
KPG-22A
Transceiver
1. Separating the Case Assembly from the
Chassis
1. Remove the two knobs ( a ).
2. Remove the two screws ( b ).
3. Expand the right and left sides of the bottom of the case
assembly, Iift the chassis, and remove it from the case
assembly ( c ).
b
b
c
4
REALIGNMENT
PC
KPG-22A or KPG-22U
PC
USB
KPG-22U
Transceiver

DISASSEMBLY FOR REPAIR

a
a
Tuning cable
(E30-3216-05)
Fig. 1
4. Taking care not to cut the speaker lead ( d ), open the
chassis and case assembly.
Note:
Solder the speaker wire back in its original position if you
have removed it.
+
Gray
–
Gray/Black
+
1.5D-XV Lead wire
–
1.5D-XV Shield wire
BRN
–
+
d
GRN
SP
MIC