Disassembly For Repair - Kenwood NX-720 Service Manual

DISASSEMBLY FOR REPAIR / 维修拆卸
1. Disassembly Procedure
1. Remove the cabinet, top packing and shielding plate of
the transceiver.
2. To remove the panel assembly, fi rst turn the transceiver
upside down.
Then, insert a fl at-head screwdriver into the holes of the
chassis and tilt it in the direction as shown by the arrow.
/ 机壳
Cabinet
/ 孔
Holes
Panel assembly
面板组件
1. 拆卸步骤
1. 取下车载对讲机的机壳、顶盖和屏蔽板。
2. 要拆卸面板组件，应先将车载对讲机颠倒放置。
然后，将一字螺丝刀插入底座的孔内，使其按箭头所示的
方向倾斜。
NX-720
15