3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS
3-2 Attaching the Zoom Lens (optional)
1.
3
Hole
Mount ring
When unplugging the cable connector, first remove the lens
itself. Then grasp this portion and pull straight out.
3-3 Attaching the Viewfinder
5.
Sliding
securing ring
Stopper
screw
4.
2.
Pin
1.
Mounting guide
4.
3.
Viewfinder
mount
base
2.
Connector
1.
Loosen the mount ring.
2.
Connect the cable connector.
3.
Attach the lens with its pin aligned with the hole in the mount.
4.
Tighten the mount ring.
CAUTION:
Be sure to tighten the mount ring completely. Incomplete
tightening may result in the lens dropping off or disturbed
back focus.
1.
Loosen the stopper screw on the viewfinder.
2.
Connect the connector.
3.
Align the mounting guide with the camera's viewfinder mount
base and attach the viewfinder.
4.
Tighten the stopper screw.
5.
Tighten the sliding securing ring.
* To detach the viewfinder, reverse the mounting procedure.
31