Operation Screen - JVC GY-DV500U Instructions Manual

12-5 OPERATION Screen

Item
SHUTTER The SHUTTER button on the right side section is used to select STEP for
fixed shutter speed or V.SCAN variable scanning rate for shooting computer
monitor screens.
STEP .............. Enables setting of different fixed shutter speeds. [1/100,
VARIABLE ....... Selected when shooting computer monitor screens, etc.
FAW Selects the W.BAL switch ( @ on page 13) position to which the FAW (Full-
Time Auto White Balance Adjustment) function is to be assigned.
NONE ............. FAW function is not used.
A ..................... FAW is assigned to the A position.
B ..................... FAW is assigned to the B position.
PRESET ......... FAW is assigned to the PRESET position.
GAIN L Selects the gain value in each position of the GAIN switch (9 on page
GAIN M 13).
GAIN H
SMOOTH Smoothens the transition when the GAIN switch ( 9 on page 13), or
TRANS WHT.BAL switch ( @ ) is switched over and achieves gradual change in
place of sudden change.
However, the smooth transition function does not function when switching
the GAIN switch set in ALC, FAS button and the LOLUX button.
ON .................. Activates the smooth transition function.
OFF ................. Deactivates the smooth transition function.
PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
Function, Operation
1/250, 1/500, 1/1000, 1/2000]
[Variable range: 60.1 to 2084.6 Hz]
12. SETUP MENU
Variation Range Initial Setting
STEP STEP
VARIABLE
NONE NONE
A
B
PRESET
–3dB L: 0dB
0dB M: 9dB
6dB H: 18dB
9dB
12dB
18dB
ALC
ON OFF
OFF
– –
73