Connecting Your Webster Ts Whiteboard - PolyVision Webster TS User Manual

the TS 400 are plastic. Wall anchors for TS 600 and TS 800 are
metal.
NOTE: note:
If you are not installing on a sheet rock wall, you must provide your
own fasteners.
5 Attach the mounting bracket to the wall anchors on the wall
using the four Phillips screws provided. Assure that the screws
are snug.
6 With the help of an assistant, lift the board and hang it on the
mounting plates using the slots at the top corners of the board.
7 Peel the backing off the front and back of the two Velcro strips.
8 Attach Velcro strips to lower right and left corners on the back of
whiteboard and press against the wall.
To mount your whiteboard on an optional stand or easel, see the
instructions included with your stand or easel, or visit
www.polyvision.com.

Connecting Your Webster TS Whiteboard

Ensure that both your computer and whiteboard are powered off
before you make connections.
Velcro
7