Table of Contents
Advertisement
Chapter 6 Manuipulating Clips with Thumbnails
6-7 Voice Memo
A voice memo is audio data that can be attached to the clip
separately from the voice recorded during shooting.
<Note>
A voice memo can be attached during recording. Please
refer to [3-8 Voice Memo Function] for more information.
6-7-1 Playing Back Voice Memos
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU BAR button. The pointer moves to the
menu bar.
3
From the MENU BAR, select THUMBNAIL
MEMO CLIPS.
The clip thumbnails with voice memos attached are
displayed in the upper section of the LCD monitor. The
lower section of the LCD monitor shows information
about the voice memo on the clip selected by the
pointer.
Thumbnail
Shows the still image that
Display
the voice memo is related to.
Shows the total number of voice
memos attached to the clip.
4
Move the pointer over the clip that contains the desired
voice memo to playback and press the SET button.
The pointer moves to the lower part of the LCD monitor.
The pointer moves down.
5
Press the left/right cursor buttons (
pointer over the still image that is related to the voice
memo you wish to play back. Then, press the SET
button.
6
The voice memo will be played back.
During voice memo playback, the still image related to
the voice memo is displayed on the LCD monitor and
the viewfinder. The video output signal is also the still
image.
To stop the voice memo playback, press the STOP
button.
7
To return the pointer to the thumbnail display after
playback of a voice memo, press the MENU BAR
button to move the pointer to the menu bar, and then
select EXIT.
VOICE
<Note>
The voice memo playback signal is emitted through the
speaker and the PHONES jack on the camera. This
signal is not emitted from the AUDIO OUT jack.
6-7-2 Recording a Voice Memo
During thumbnail display, voice memos can be added to the
clip on which the pointer is positioned.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Use the cursor buttons to move the pointer over the clip
to which you want to attach a voice memo.
3
Press the Voice Memo button and record the voice
memo through the Voice Memo Microphone.
"VOICE REC" is displayed at the top of the screen.
<Notes>
When a voice memo is attached during thumbnail
display, the voice memo is related to the first still
image of the clip. Please refer to [3-8 Voice Memo
Function] for more information.
When the power is abruptly turned off while a voice
memo is being recorded during playback of a clip, the
clip will not be affected by this, but the voice memo
will not be recorded.
Voice Memo
Microphone
4
Press the Voice Memo button or the stop button again
to stop recording.
(continued)
) to move the
Voice Memo Button
6
81
Advertisement
Table of Contents
