Table of Contents
Advertisement
Chapter 4 Adjustments and Settings for Recording
4-9-4 Assigning Functions to USER
MAIN, USER1 and USER2 Buttons
The USER MAIN, USER1, and USER2 buttons can be
assigned user-selected functions.
To select desired functions, use the menu options USER
MAIN SW, USER1 SW and USER2 SW. These options can
be found in the <USER SW> screen, which is accessible
from the CAM OPERATION page.
Selectable Functions
INH:
No function assigned.
S.GAIN:
S.GAIN function assigned.
S.IRIS:
Super Iris function assigned.
This is useful for backlight compensation.
I.OVR:
Iris Override function assigned.
The target (reference) value in Auto Iris mode
must be changed.
To change the target value, put the AJ-
SPC700E into this mode and press the JOG
dial button. Turn the JOG dial button clockwise
or anti-clockwise to change the value. The iris
indication section of the viewfinder screen
displays "+", "+ +", "–", or "– –".
When the desired value is displayed, stop
turning the JOG dial button. Then, press the
dial button to accept that value.
Note that once the mode is cancelled or the
power is turned off the original reference value
will be used again.
+: Iris opens up by 0.5.
+ +: Iris opens up by 1.
–: Iris closes down by 0.5.
– –: Iris closes down by 1.
No indication:
The reference value is used.
S.BLK:
Super Black function assigned.
This function lowers the black level to the
pedestal level or below.
B.STR:
Black Stretch function assigned.
This function emphasises the black shades.
ATW:
Auto-tracking
assigned.
Y GET:
Function of indicating the brightness level of
the center marker assigned.
white
balance
function
NEWS-G:
Function of switching on and off News
Gamma assigned.
<Note>
News Gamma is capable of reproducing
shades without whiteout or blackout. This is
useful for such operations as news shooting.
To turn on/off News Gamma using the USER
button which is assigned NEWS-G, the menu
option GAMMA MODE SEL must be set to
"STD1" or "STD2".
This option can be found in the <GAMMA>
screen, which is accessible from the PAINT
page.
AUDIO CH1: Function of switching the input signal source
for Audio Channel 1 assigned.
Pressing the button switches the input signal
in the following order: FRONT
REAR. Note that the AUDIO IN switch can
also be used to change the input signal: later
specification takes precedence.
AUDIO CH2: Function of switching the input signal source
for Audio Channel 2 assigned.
Pressing the button switches the input signal
in the following order: FRONT
REAR. Note that the AUDIO IN switch can
also be used to change the input signal: later
specification takes precedence.
REC SW:
Function of the REC START/STOP button
assigned.
RET SW:
Function of the RET button at the lens
assigned.
SLOT SEL:
Function of switching the target P2 card
among multiple cards assigned.
PRE REC:
PRE RECORDING switch ON/switch OFF
function assigned.
USB:
USB Drive Mode switch ON/switch OFF
function assigned.
4-9-5 Setting Color Temperature Manually
The white balance can be manually adjusted by setting the
color temperature. Manual color temperature settings can be
performed for each of the WHITE BAL switch positions:
PRST, A and B.
To enable manual color temperature setting, the menu
options AWB A and AWB B must be set to VAR.
The color temperature is set using the menu options COLOR
TEMP PRE, COLOR TEMP A, and COLOR TEMP B.
These options can be found in the <WHITE BALANCE
MODE> screen, which is accessible from the CAM
OPERATION page.
(continued)
W.L.
W.L.
55
4
Advertisement
Table of Contents
